ICS
Intelligent Control Systems
Facility Automation and Security System Specialist
Facility Automation and Security Systems
1 Port Modbus RTU to Modbus TCP (Ethernet) Server Model USR-N510
1 port Ethernet device servers USR-N510 can realize bi-directional transparent transmission between RS232/RS485/RS422 and network.
● 1-port RS-232/422/485 Ethernet device servers
● Power supply accepts wide voltage input range DC 5-36V
● Support TCP server/client, UDP server/client,https client, Virtual COM
● Support Modbus RTU to Modbus TCP
● Support flow control CTS/RTS, XON/XOFF
● Support 1 RS-232, RS-485/422 3IN1 serial port to 1 10/100Base-T(X) self-adaptive
Ethernet interface
● Configuration via Web Server page, AT commands, and Windows Utility
Specification
Processor Cortex-M4
Basic Frequency 120MHz
Flash 512K byte
Ethernet Port Number1
Interface Standard8 pin RJ45
Rate 10/100 Mbps, MDI/MDIX, auto switch between
cross and direct connection
Protection 2KV electromagnetism isolation, shell insulation
blocking
Network Protocol IP,TCP,UDP,DHCP,DNS,HTTP,ARP,ICMP,Web
socket,Httpd client
Receive Buffer Max 16k bytes buffer
Serial Port Number 1
Interface StandardRS-232: DB9 pin type, RS-485: 2 wire
(A+,B-), RS-422 (A,B,Y,Z)
Data Bits 5,6,7,8
Stop Bit 1,2
Check Bit None,Even,Odd,Space,Mark
Baud Rate 600bps ~ 230.4Kbps
Flow Control RTS/CTS
Buffer Send and receive 2k bytes respectively
Protection RS-485: anti-static 2KV,lightning protection
RS-485 Pull-up and Pull-Down Resistor2.2 KΩ
Software Virtual Serial(USR-VCOM)Windows 2000 or
higher(32 bit/64 bit)
Configuration Built-in webpage, computer set-up software, serial
command
Size 88 x 81 x 24 mm
Operating Temp. -40 ~ 85°C (industry)
Storage Temp. -40 ~ 85°C, 5 ~ 95% RH (no condensation)
Input Voltage DC 5 ~ 36V
Working Current 53mA @ 12V
Power <1W
More
CertificateCE,FCC,ROHS
Warranty2 years