Accessible Toilet Alarm System

Introduction

INTELLIGENCE” disabled toilet alarm system is a multi-zone assistance call toilet alarm system for buildings that need central indication of the original call. The system is capable of providing a visual and audible warning when a disabled person requires assistance when using a toilet or bathroom.

The system is capable of transmitting the signals up to 1.2 km, via 1 pair of twisted pair with shielded cable. And its modular design and simple operating principle enable even to implement its use in new or existing applications. All modules in an installation connect to the same 2-wire cable which is used to exchange data between modules and a central indicator unit. Each Module is assigned a unique address and communication uses a master/slave protocol

Operation

The person in need of assistance can activate the alarm by pulling the alarm pull cord or call switch . The red LED will illuminate on the alarm pull cord or call button switch to show that alarm has been activated and the over door Indicator and sounder that is installed outside the door will activate to alert people to give an assistance. A flashing LED and buzzer on the central alarm indicator panel will activate to identify the relevant zone. To Reset the Alarm

By resetting the alarm at reset key switch located at WC. The over Door sounder will be silent and the LED indicator will remain flashing

By reseting the alarm at alarm indicator panel, the over door sounder shall be silent and the LED indicator will stop illuminate.